MoPower Calibrations is proud to release a Handheld Programmer for the 2004-2005 Dodge SRT4. This flash programmer will flash tunes directly into your PCM through the OBDii Port. The MoPower Calibratiosn Programmer is a perfect solution for tuning your Neon. Now there is no need to send in a PCM to get bench flashed and no downtime.

The MoPower Calibrations Dodge SRT4 Performance tunes were developed to optimize the power and torque output while maintaining reliability. Using state of the art equipment to develop calibrations we are able to provide you the best tunes on the market.

We start our calibrations with a stock file and immediately work on the throttle response. From there it's important to make sure we maintain gas mileage and reliability. Then we take the test vehicle to the Dyno and finish developing the calibration. On the dyno we are able to monitor Horsepower, Torque, Air/Fuel Ratio and if needed Fuel pressure.

At this point we are able to dial in the Power and Torque output while making sure the air/fuel ratio is safe and within the desired range. After we reach the desired output we put the car thru rigid road testing and then we are able to release the calibration. We hope that you have the best experience with our PCM Flashes. Please let us know if anything isn't up to your expectation. Thanks for choosing MoPower Calibrations!!!

Performance Flash Specs:

• Increase of 20-30 WHP & 30-40 ft-lbs of Torque
• Increased WOT & Part Throttle Boost
• Improved Turbo Response
• Refined Boost Hold Feature During WOT Shifts
• Aggressive Exhaust Note During Deceleration
• Modified Fan Temperature Settings
• Modified Secondary 02 Sensor Algorithms
• Re-Calibrated Spark and Fuel Tables

91+ Octane Fuel Required

MoPower Calibrations Custom Tunes Included (Software not included):

Tune 1: Syked Stage1

Tune 2: Syked Stage2

Tune 3: Syked Stage3

*Stage 2 and Stage 3 tunes require installation of the Dodge SRT4 Stage 2 and Stage 3 components. (Injectors, wastegates, cams, etc)

MoPower Calibrations are sold for off-road use only. All performance Calibrations and Engine Control Units installed are at the customers own risk. MoPower Calibrations or www.mo-power.com holds no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance products from MoPower Calibrations . Items sold for off-road use only are illegal in many states and provinces and are intended for racing vehicles which may never be used on a public road or highway.